Optical Components
Optical Lenses
Optical Coating
Metal parts
Your current location is: Home >> News
Photoelectric Instrument Co., Ltd. of disc hydraulic universal testing machine error analysis
Date:2012/12/27 10:58:43
 
the friction is too large, exclude this reason, the push plate is adjusted to the outside, the small dial adjustment qualified, such as moderate disc still ultra-poor should be appropriate to reduce the weight of the B of thallium and C thallium until certified by.

      Third: You should change the push plate and the angle of the tooth head contact surface, the degree of disc hydraulic universal testing machine of the contact surface is usually fixed through the top and bottom screws with a flat steel surface of the push plate adjustment method the two screws are loosened, the upper side of the mat in between the steel and the push plate with a copper or other thin metal sheet, or the lower side (the pad at one side only) in order to change the angle, repeatedly test adjusted until qualified.

     Recommended reading: Polaroid polarizing microscope how to correct

Next  [1] [2] [3]